Featured image- Arduino-based study on effect of different parameters on cooling of water

Arduino-Based Study on the Effect of Different Parameters on Cooling of Water

Estimated Reading Time: 11 minutes This is another another Arduino-based project that studies the effects of different parameters on cooling of water. A DS18B20 waterproof temperature sensor was used to monitor the temperature of hot water that was allowed to cool. This is used to take temperature readings for cooling water at various room temperatures, mug sizes, and mug materials. Using arduino-based temperature monitoring, this article investigates the influence of these parameters on cooling.

Featured image - Techniques for characterisation of polymeric nanoparticles

Techniques for Characterisation of Polymeric Nanoparticles: A Review

Estimated Reading Time: 12 minutes This review article discusses the various analytical techniques for the characterisation of Polymeric Nanoparticles (PNPs). Because of their distinctive qualities, they have gained a lot of attention in recent years. As a result, knowing their properties is important. In fact, a range of analytical techniques are used to investigate these features. It includes microscopic, spectroscopic, light scattering, and diffraction techniques. This article will provide you with a review of these characterisation methods and how they are used to study the properties of PNPs.

pectin-in-jam-by-Maryam-Vanaee-and-Zahra-Kamali

Pectin In Jam

Estimated Reading Time: 6 minutes Understanding how pectin works will help you make a better quality jam if you’re looking for a tasty homemade jam.
In this article, we will look at how pectin works in jams and why it is important and necessary to add pectin to jams. by Maryam Vanaee, Zahra Kamali and Cademix Institute of Technology

Learning by Doing Ahmad Atash Afzoon Cademix Career Autopilot Event Advantage Austria

Learning By Doing

Estimated Reading Time: 5 minutes In this post, we are going to talk about a topic that is a method of learning known as learning by doing. In this method we learn more effectively when we actually do the activity. Learning by doing is a method of learning that learners can connect with their environment in order to adapt and learn.

best contacts for dry eyes, colored contacts non prescription

Best Contacts for Dry Eyes: Top Choices for Optimal Comfort

Estimated Reading Time: 4 minutes Dry eyes can cause significant discomfort for contact lens wearers. Thankfully, certain contact lenses are designed to alleviate these symptoms. This article explores the best contact lenses for dry eyes, their features, benefits, and tips for managing dry eye symptoms while wearing contacts.

silicone hydrogel

Silicone Hydrogel Contact Lenses: Benefits, Features, and Considerations

Estimated Reading Time: 5 minutes Silicone hydrogel contact lenses have revolutionized the world of vision correction, offering improved comfort and eye health compared to traditional hydrogel lenses. This article explores the benefits, features, and considerations of silicone hydrogel contact lenses, helping you understand why they might be the ideal choice for your vision needs.

Verification of Newton's law of cooling using Arduino - Featured image

Verification of Newton’s Law of Cooling Using Arduino

Estimated Reading Time: 11 minutes The Arduino platform is a free and open source electronics platform. Due to their ease of use and inexpensive cost, Arduino-based projects have gained widespread recognition. This is also an arduino-based project that examines Newton’s law of cooling. A DS18B20 waterproof temperature sensor was used for temperature monitoring. Newton’s law of cooling was validated by using temperature data. This article will discuss the Newton’s law of cooling and serve as a guide for verifying it with an Arduino. In fact, the main focus of the article is the experimental setup for Arduino-based temperature monitoring and the verification of the law.

Manufacturing_industry_and_COVID19_Country_-Cademix-Magazine-Article4-1-1

Manufacturing Industry during COVID19 Pandemic

Estimated Reading Time: 8 minutes Manufacturing industry during the pandemic COVID19
is the subject of an article in which I discuss how the crisis caused by the COVID-19 pandemic will affect the global economic and financial scenario in 2020.
By Zahra Kamali, Cademix Institute of Technology

goal setting MAryam vanaee Cademix Conference

Goal Setting

Estimated Reading Time: 5 minutes One of the main problems that people struggle with achieving their goals is the lack of motivation and movement in the path of the target with variable speed. In this article, we will explain some basic concepts such as goals, motivation, priority, etc., and then we will introduce several solutions to achieve constant speed By Maryam Vanaee, Cademix Institute of Technology